Even though wildfires are a part of the natural process of creation and destruction in the environment, the bad thing for people is that sometimes their homes are located directly in the path. A large number of people have to worry every year whether a wildfire will affect their area, but if you own your home and you know what to do, there are things that can protect your home from them. Depending on the circumstances and where your home is located, it may not be enough, but it certainly cannot hurt to try and you may actually end up saving your home.
Using fire-resistant materials on the exterior of your house is essential. The roofing material is the most important, since this has the largest amount of surface area and sparks of fire called firebrands will be picked up by the wind and possibly carried over your house. Having the fire-resistant roofing material such as metal, fiberglass, or tile will slow down the spread of the fire from the roof and it may not even catch on fire at all from one of these small sparks. You do not want to use oil-based roofing materials on a home that is located in a place at risk of wildfires.
Fire-resistant materials on the outer walls of your home will also slow down the spread of the fire, such as stone, metal, or brick, so if you are considering having a home built for you, these are materials you really want to consider. You should also have smaller windows on the exterior of your home, since large windows are more likely to break and allow the hot air and fire sparks from the outside of the house inside, where it will catch curtains and everything else. If you have to have large windows, have multi-pane ones instead of single-pane.
If there is a wildfire close to where you live, wet down the exterior of the house, especially your roof. This will give a little extra protection against firebrands floating by on the wind. Wetting down the yard and vegetation will also help, but you should do this just before you decide to leave the house.
Get rid of any dead vegetation in the yard and do not allow things like dead leaves to build up, since these are easy targets. If you do have a pile of leaves in your yard, the best thing that you can do before you evacuate is soak them down with water.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Dallas Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Thursday, October 18, 2007
Your Laptop Hates Water
To anyone who owns a laptop, getting a soft drink or a glass of water anywhere near it is probably taboo, but if you are like me, then you probably keep something to drink near by at all times. You’d rather “risk it” than go thirsty, but this does not always have to be the case. While getting your laptop wet in any way can seriously damage it, there are ways to save it if you do happen to spill your drink or anything else onto the keyboard and subsequently, onto the hard drive, and etcetera. Unlike a desktop computer, the keyboard of a laptop is obviously located on top of the most important components of your computer: hard drive, memory, CD-ROM, and etcetera. Without these, your computer will not function.
The problem when you spill something onto your laptop is not with the actual liquid that you spill on it, although things that become sticky after they dry like soda or tea can be a hassle to clean up. The problem lies with the electricity that is running through your laptop at the time you spill the liquid onto it. It usually takes a few seconds for the liquid to get down into the electrical components of the laptop, so the first thing that you need to do if you spill something on your computer is to unplug it and take out the battery IMMEDIATELY. You must remove the electrical current from the laptop as quickly as possible in order to be able to save it.
After you remove the electrical current, the next thing that you have to do is to turn the machine upside down completely in order to keep the liquid from getting further into the shell of the laptop. This will keep it from coming into contact with your hard drive, memory, motherboard, and etcetera. You should allow the least amount of this liquid that comes into contact with those important components as possible, especially if it is an acidic liquid such as soda.
After you have drained as much of the liquid as possible out of it, collect some paper towels or just a normal towel and clean up any of the liquid from the outside of the machine.
At this point, depending on if you got the electricity removed from the unit in time, you could take it to a professional repairman or continue to repair the laptop yourself. The extent of the “repair” could be just allowing the unit to completely dry out or it could involve removing components and cleaning the sticky soda residue from them. Attempting to repair it yourself could possibly void your warranty for future damages, but a professional could be expensive.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
The problem when you spill something onto your laptop is not with the actual liquid that you spill on it, although things that become sticky after they dry like soda or tea can be a hassle to clean up. The problem lies with the electricity that is running through your laptop at the time you spill the liquid onto it. It usually takes a few seconds for the liquid to get down into the electrical components of the laptop, so the first thing that you need to do if you spill something on your computer is to unplug it and take out the battery IMMEDIATELY. You must remove the electrical current from the laptop as quickly as possible in order to be able to save it.
After you remove the electrical current, the next thing that you have to do is to turn the machine upside down completely in order to keep the liquid from getting further into the shell of the laptop. This will keep it from coming into contact with your hard drive, memory, motherboard, and etcetera. You should allow the least amount of this liquid that comes into contact with those important components as possible, especially if it is an acidic liquid such as soda.
After you have drained as much of the liquid as possible out of it, collect some paper towels or just a normal towel and clean up any of the liquid from the outside of the machine.
At this point, depending on if you got the electricity removed from the unit in time, you could take it to a professional repairman or continue to repair the laptop yourself. The extent of the “repair” could be just allowing the unit to completely dry out or it could involve removing components and cleaning the sticky soda residue from them. Attempting to repair it yourself could possibly void your warranty for future damages, but a professional could be expensive.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Wednesday, October 17, 2007
Cleaning Out Your Refrigerator
I love my food, but unfortunately, if I do not remember to keep my refrigerator cleaned out regularly, mold loves my food, too. Often people who have busy lives working and taking care of children cannot remember to clean their refrigerators out as often as they probably need to and since they have more people in the house to feed, there will also be more food. More food in the refrigerator equals more of an opportunity for bacteria and mold to grow. This is not typically a problem as long as someone keeps an inventory of what is in the refrigerator and what needs to be thrown away. You cannot completely keep mold out of your refrigerator because it exists in its spore form in the air that we breathe and unless we are talking about an extremely controlled situation like a hospital clean room, it is truly everywhere. There is not really any escaping it and while mold can grow in your fridge, you can do things to inhibit its growth rate.
Take anything that is outdated and obviously inedible out of your refrigerator and throw it away. Cleaning out everything from the refrigerator and setting it aside to go through later is a good idea when you need to clean out the entire refrigerator and sterilize it. Gather whatever chemicals you might want to use for cleaning the fridge and while this can include bleach, you might want to find another alternative that kills mold and bacteria specifically. If you only have bleach, though, go ahead and use it; just do not mix bleach with any other household chemicals.
Wash all the surfaces in the refrigerator with whatever cleaning solution you have decided on, including the racks in the door and the shelves and drawers inside the main part of the unit itself. Give it a good and thorough scrubbing. This is probably something that you should consider doing between two and three times a year or possibly more, depending on how messy your fridge gets.
When you are done cleaning the inside of the refrigerator (and the outside, if it needs it), it is time to go through what you took out. Take anything that you no longer desire and is no longer edible and throw it away. If any jars have any sticky residue on the bottoms of them, wash these off with a warm rag so you don’t get sticky grape jelly or whatever it is back on the surface of your clean fridge.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Take anything that is outdated and obviously inedible out of your refrigerator and throw it away. Cleaning out everything from the refrigerator and setting it aside to go through later is a good idea when you need to clean out the entire refrigerator and sterilize it. Gather whatever chemicals you might want to use for cleaning the fridge and while this can include bleach, you might want to find another alternative that kills mold and bacteria specifically. If you only have bleach, though, go ahead and use it; just do not mix bleach with any other household chemicals.
Wash all the surfaces in the refrigerator with whatever cleaning solution you have decided on, including the racks in the door and the shelves and drawers inside the main part of the unit itself. Give it a good and thorough scrubbing. This is probably something that you should consider doing between two and three times a year or possibly more, depending on how messy your fridge gets.
When you are done cleaning the inside of the refrigerator (and the outside, if it needs it), it is time to go through what you took out. Take anything that you no longer desire and is no longer edible and throw it away. If any jars have any sticky residue on the bottoms of them, wash these off with a warm rag so you don’t get sticky grape jelly or whatever it is back on the surface of your clean fridge.
Jim Corkern is a writer and promoter of
Texas Water Damage Restoration and
Houston Water Damage Restoration Which are Certified IICRC Water damage and mold remediation contractors.
Subscribe to:
Posts (Atom)
